Skip to content
Costs and price

How much does it cost to renovate an apartment in Fortaleza?

It depends less on the area and more on what you touch: services, bathrooms and joinery weigh far more than flooring and paint. Here are the four levels of renovation, what drives the cost and the building's rules.

Gabriel Dutra Soares and Pedro Plutarcho Civil engineers and JP partners · CREA-CE 386564CE and CREA-CE 393625 Updated November 2026 · 4 min read
Short answer

On a renovation, the cost depends far more on what you touch than on the size of the apartment. Replacing floors and painting is one bill; redoing electrics, plumbing, bathrooms and joinery is another, several times bigger, on the same square metre. That is why a price per m² for renovation is misleading, and the way to a reliable number is to define the scope first.

This page shows the four levels of renovation, what weighs most on the cost, what usually turns up inside the walls, the rules the building requires and a full retrofit JP carried out.

The four levels of renovation

  • Surface refresh. Paint, new flooring, light fittings and taps. No walls, services or bathrooms touched. It is quick and the cheapest per m².
  • Wet areas. Bathrooms and kitchen redone: tiling removed, waterproofing, new plumbing points, countertops and sanitaryware. This is where most of the cost of many renovations sits.
  • New services. All of the above, plus electrics and plumbing redone throughout the apartment, a new consumer unit, air-conditioning points and a false ceiling to hide the infrastructure.
  • Full retrofit. Everything above, plus a layout change, lighting design, bespoke joinery and sometimes furniture. The apartment comes out new on the inside.

Two 70 m² apartments can be at different levels and have costs that cannot be compared. Before asking for a price, decide which level you are at.

What weighs most on the cost

  • Services. Redoing electrics and plumbing means opening walls and floors, running everything again and closing up. It is work that does not show at the end, but it pays for the apartment's safety.
  • Bathrooms and kitchen. Waterproofing, tiling, stone countertops, sanitaryware and fittings add up over a few square metres.
  • Joinery. Wardrobes, a fitted kitchen and bespoke panels are often one of the biggest lines of a renovation, and vary a lot with material and hardware.
  • Demolition and rubble. Breaking things costs money, and so does getting the rubble out of a building: a skip, the service lift and limited hours.
  • The finishes you choose. Tiles, stone and fittings of different standards do the same job at very different prices.

What turns up inside the walls

Renovation carries a risk a new build does not: you only know the state of the services once you open them up. In older buildings it is common to find old corroded pipes, wiring undersized for today's appliances, uneven floor screeds and expired waterproofing in the bathroom.

That is why every renovation budget needs a reserve for whatever turns up, and a technical survey before closing the scope cuts the surprises a lot.

The building's rules

Apartment renovation follows the Brazilian standard ABNT NBR 16280, on renovations in buildings. In practice, before starting you hand the building manager a renovation plan signed by a qualified professional, with registered technical responsibility, saying what will be done, by whom and over what period.

On top of that, every building has its own rules: working hours, use of the service lift, protection of common areas, where the skip goes and notice to neighbours. That affects the schedule, and the schedule affects the cost. It is worth reading the rules before closing the plan.

Why we do not quote a price per m² for renovation

Because it would almost always be wrong. The same area can be just paint or a full retrofit, and an average number would serve both badly. A per-m² renovation price given before the scope is known is an invitation for the budget to blow up later.

The approach that works is different: define the level of renovation, do the survey, choose the finishes and only then budget item by item.

When JP is the way, and when it is not

JP does renovations with design, services and joinery, like the Wave Cumbuco retrofit. If your renovation is only paint, new floors or a one-off repair, a good tradesperson will do it better and cheaper, and we will say so plainly.

What to bring when asking for a quote

  • The apartment's floor plan, if you have it, and photos of each room.
  • The level of renovation you have in mind and what you want to change in each room.
  • References for the finishes and joinery you like.
  • The building's renovation rules.
  • Your timeline, especially if the apartment will be rented out or you will be living in it.
Next step

Want to talk about your project?

Bring the land, the design or just the idea. The first conversation is there for us to say whether we can do what you want for what you have.

WhatsApp